Heat-Resistant Inorganic Yellow Pigments for High-Performance … – Plastics Technology

Lanxess’  Colortherm Yellow pigments based on iron oxide and zinc oxide are designed for cost-effective coloration  
Two new yellow inorganic pigments for high-performance polymers has been added to the Colortherm Yellow pigment range from Lanxess, Pittsburgh, Penn. Colortherm Yellow 5 and Yellow 26 are based on iron oxide and zinc oxide respectively and are specially designed for cost-effective coloration in a temperature range of between 220 C/428 F and 260 C/500 F.
With equally high color strength at the same color space, they reportedly offer plastics manufacturers and processors an excellent compromise between the best-in-class Colortherm Yellow 20 and Colortherm Yellow 30 products, which are heat stable up to 300 C/572 F. Thermal stability as a quality factor ‘plastics’ can now be used in applications that would have been considered impossible just a few years ago. As the use of technical plastics in high-tech applications becomes more widespread, the requirement profile for the pigments used for coloring is also growing. In particular, the heat stability of the colorants is becoming a decisive quality factor. In the case of organic pigments, high processing temperatures often lead to accelerated decomposition; but inorganic alternatives subject to color variations at temperatures above 180 C/356 F.
For reliable yellow coloring of high-temperature polymers, Lanxess now offers the modular Colortherm Yellow product range. It comprises the iron oxides Colortherm Yellow 5 and Colortherm Yellow 20 as well as Colortherm Yellow 26, Colortherm Yellow 30 and Colortherm Yellow 3950 zinc ferrites. The range covers not only the color spectrum of light, saturated yellow shades but also orange tones. As such, plastic formulations can be easily realized at processing temperatures of up to 300 C/572 F, according to Lanxess.
Due to their special manufacturing process, the color strength of the zinc ferrites Colortherm Yellow 26 and Colortherm Yellow 30 is up to 20% higher than comparable products. This means a corresponding lower level of pigment addition is required to color the plastic.
Said Stefano Bartolucci, global market segment manager for plastics at the inorganic pigments business unit, “The special feature of our Colortherm Yellow product range is the high flexibility in pigment selection. Depending on the type of plastic, the pigments used can mean that varying levels of thermal stability are required – or, to put it more accurately, are sufficient. In the case of coloring PE, for example, it is sufficient for the pigments used merely not to exhibit any color changes at processing temperatures of around 240 C/464 F. However, for applications using nylon, PP, and PPS, thermal stability of around 300 C/572 F is essential. By expanding our Colortherm Yellow range of special pigments, we have given processors the option to choose the right pigments for them, tailored to suit the type of plastic to be colored and the requisite thermal stability.”
Here’s the machinery, tooling, and process know how you need to get the most out of these high-performance materials.
A look at causes, detection, and prevention.
Newer specialty slip masterbatches go beyond traditional capabilities to provide greater thermal stability, reliability, and ability to hold COF steady during laminating.
© 2023 Gardner Business Media, Inc. Privacy Policy
[Log On]


Leave a Comment

Your email address will not be published. Required fields are marked *