Aluminum plays a key role in reducing the weight of a car and thus also helps to reduce fuel consumption. A modern car contains large amounts of aluminum and use of the metal is on the increase. It is thus important to exploit the material as optimally as possible, and a new casting technology developed in Norway has the potential to do just that.
The process is called Low-Pressure Casting (LPC) and makes it possible to cast aluminum bolts with high-quality surface properties. This enables the metal to be used directly in the manufacture of parts such as suspension components in cars.
Casting makes the production of aluminum car components less expensive, more eco-friendly, and more efficient. It also prevents the wastage of large amounts of raw materials. The casting technology has been developed by the aluminum producer Hydro and is carried out under vacuum conditions.
In order to investigate and demonstrate the potential of the technology, Hydro invited SINTEF and Raufoss Technology to join forces as part of a project called HyForge. So far, the results have been very promising, the partners say.
Currently, a car component production line is made up of several stages, including casting, heat treatment, extrusion and the subsequent forging/shaping process that ensures that the final product is fashioned with its intended shape. It is common for the industry to use extruded bolts in the production of suspension components. This is a costly, time- and energy-consuming process that also generates large volumes of waste.
The research team has used Hydro’s new casting technology to demonstrate that it is possible to cast bolts used in suspension components and thus eliminate the extrusion stage from the production process.
The casting of aluminum car suspension components removes a stage from the production line. Photo: Raufoss Technology
The extrusion process involves forcing the metal through a nozzle. The aim is to ensure production of a uniform material that is free of contaminants and surface defects. But it works in the same way as a toothpaste tube, so there is always some residual waste.
The new casting technology results in fewer defects and gives the raw material a high-quality surface finish. This is a gamechanger in the manufacture of aluminum car components because the process is both quicker and cheaper without the extrusion stage.
The research team has been working to obtain an understanding of how the cast material behaves and what properties it acquires during forging. It has been conducting comparisons to identify optimal alloy compositions and looking into what changes need to be made to the production process.
Our focus has been on implementing a production process that ensures that the suspension system has the necessary properties. This is a safety-critical component, so there are stringent requirements when it comes to the quality and properties of the product.
We’ve been looking into heat treatment and all the various stages in the process that the material has to undergo so that we can demonstrate that the cast material is free of defects and fit for purpose. We’ve also been using models and simulations to help us better understand what happens to the material during the production process.
In addition to laboratory trials, the team has carried out physical experiments in collaboration with the project’s industry partner Raufoss Technology. These have involved creating the first demonstrator of a production line for aluminum suspension components using cast bolts.
The aim of the HyForge project is to demonstrate, and establish confidence in the fact, that the use of cast bolts is the best way of producing suspension components in the future.
The HyForge project is being funded by the Research Council of Norway under project grant no. 295873.
| Permalink | Comments (2)
Bolts or billets?
Posted by: Bob Niland | 14 January 2023 at 04:16 PM
That actually is a good question.
It appears to be a translation problem. From the HyForge “English” web site, referenced above:
“LPC (Low Pressure Casting) is a casting method developed by Hydro Aluminum R&D which enables the casting of small billet dimensions of high quality, without any casting defects and with an even casted surface.
From the HyForge Norwegian language web site:
“LPC (Low Pressure Casting) er en ny støpeteknologi utviklet av Hydro Aluminum R&D som muliggjør støping av bolter med mindre dimensjoner med høy kvalitet, ingen støpefeil og med en jevn og fin overflate. “
Then from Google Translate:
LPC (Low Pressure Casting) is a new casting technology developed by Hydro Aluminum R&D which enables the casting of bolts with smaller dimensions with high quality, no casting defects and with a smooth and fine surface.
Posted by: Gryf | 15 January 2023 at 11:46 AM
The comments to this entry are closed.